Charging best practices
Charging your mobile hotspot properly is important to ensure its longevity and maintain
its performance. Here are some best practices to follow when charging your mobile
hotspot:
• Use the provided charging cable: To ensure the safety and performance of your
mobile hotspot, always use the charging cable that came with the device. Using
third-party cables might result in slower charging, and can damage your device. Do
not use damaged or frayed charging cables.
• Plug the cable into a power source: Plug the charging cable into a wall adapter
(recommended) or a computer USB port to charge the device. Make sure that the
power source is stable and reliable.
• Check the charging status: When you plug in the charging cable, check the device's
charging status. The charging indicator in the status bar shows a lightning bolt over
the battery icon if the device is charging. If the charging indicator does not appear,
try unplugging the cable and plugging it back in.
• Charge the device fully: We recommend that you charge the mobile hotspot fully
before using it for the first time, and that you let the device recharge fully before
using it again when you discharge the battery. This helps to maintain the battery's
lifespan and overall performance.
• Avoid overcharging: Overcharging the device can damage the battery and shorten
its lifespan. When the device is fully charged, unplug it from the power source. Don't
leave it plugged in overnight or for long periods of time. Remove the battery and
use Plugged-In Mode if you are using the device in a fixed location.
• Charge in a well-ventilated area: Charging your mobile hotspot in a well-ventilated
area can prevent overheating and ensures that the device charges efficiently. Avoid
charging the device in an enclosed space or in direct sunlight.
By following these best practices, you can ensure that your mobile hotspot stays charged
and performs optimally for years to come.
Fixed setup
Depending on your needs, you might want to use your mobile hotspot in a fixed location
as a replacement for a conventional modem or a modem router/gateway. You can set
up your hotspot for fixed use either by itself, or connected to a conventional WiFi router
with the included Ethernet port.
NOTE: Only use the included USB cable and power adapter with your mobile
hotspot. Using other cables or power adapters can cause your hotspot to function
improperly or display error messages.
Overview and Setup
Nighthawk M6 Pro, Nighthawk M6
14
User Manual