Configure Access Controls From The Web User Interface - NETGEAR Nighthawk M6 Pro User Manual

• Balanced: Best battery life.
• Performance: Best performance on battery.
• Plugged In: Max performance with battery removed.
Table 4. Power Manager Profile Settings
Balanced
LCD on 1 minute
time
WiFi range Short
WiFi 5 minutes
standby
Ethernet Off
port
Ethernet 100Base-T
speed
To change power mode from the web user interface:
1. From the web user interface dashboard, select Settings > General > Power Mode.
The Power Mode page displays.
2. Click or tap to select a power mode that suits your needs.
3. Click or tap Apply.
A message displays telling you that to save this change, your device must restart
WiFi connections.
4. Click or tap Continue.
Your settings are saved.
Configure access controls from the
web user interface
You can use access control to set up a list of specific devices to be allowed access or
blocked from accessing your mobile hotspot's Internet connection.
Access the web user interface
Nighthawk M6 Pro, Nighthawk M6
Performance Plugged In
1 minute 1 minute
Long Extended
60 minutes Never
On On
1000Base-T 2.5GBase-T
(M6 Pro) or
1000Base-T
(M6)
64 User Manual