Enable Sim Security From The Web User Interface; Change The Web User Interface Login Password - NETGEAR Nighthawk M6 Pro User Manual

Enable SIM security from the web
user interface
You can create another level of security by configuring a PIN that you must enter each
time that you power on your mobile hotspot.
To enable SIM security from the web user interface:
1. From the web user interface dashboard, select Settings > Security > SIM Security.
The SIM Security page displays.
2. Click or tap ACTIVATE.
3. Enter a PIN to use for your device and click or tap Apply.
Your PIN is saved.
NOTE: If you enter an incorrect PIN three times, the SIM is blocked. If the
SIM is blocked, contact your cellular data service provider to receive a PUK
number to unblock the SIM.
Change the web user interface
login password
Your mobile hotspot is set up to use a default web user interface login password. The
default password is printed on a label in the battery compartment. You can optionally
change the default password to your own password.
To change the web user interface login password:
1. From the web user interface dashboard, select Settings > Administration > Set
Password.
The password settings are displayed.
2. In the New Password field, enter the password that you want to use.
The maximum password length is 31 characters.
3. Click or tap Apply.
Your settings are saved.
Access the web user interface
Nighthawk M6 Pro, Nighthawk M6
67 User Manual