Travel Setup; Charge The Battery - NETGEAR Nighthawk M6 Pro User Manual

Travel setup

To set up your mobile hotspot for travel usage, install and fully charge the battery before
turning the device on.

Charge the battery

Your mobile hotspot battery comes partially charged. We recommend that you fully
charge the battery before using your mobile hotspot away from home.
NOTE: For the fastest possible charging, use the USB power adapter and cable
included with your mobile hotspot. Third-party USB power adapters and
computer USB ports typically do not provide the same amount of current as the
included USB power adapter and will not charge your battery as quickly.
Third-party cables can also limit battery charging speed.
Figure 6. Nighthawk M6 battery charging
To charge your battery:
1. Connect the USB charging cable to your mobile hotspot.
2. Connect the other end of the charging cable to the USB power adapter.
3. Plug the USB power adapter into a wall outlet.
Overview and Setup
Nighthawk M6 Pro, Nighthawk M6
13 User Manual