Enable Or Disable Ethernet - NETGEAR Nighthawk M6 Pro User Manual

• If an upgrade is available and you want to install it, tap the Update now button
to install the update.
• To postpone the update, tap Postpone.
If you tap Update now, the update proceeds.
If you tap Postpone, a message displays indicating that the update will be postponed
for 4 hours. You can then click Apply to accept the postponed update.
When the wait period is complete, after you are prompted to continue the update,
tap Continue Update.
If the battery is low, a message displays indicating that the battery is low.
6. To continue, connect the device to the charger and click Apply.
After the update is complete, your mobile hotspot restarts.

Enable or disable Ethernet

You can manually enable or disable your mobile hotspot's Ethernet port independently
of the power mode that you currently have selected. Depending on the power mode
that you are currently using, your Ethernet port might already be enabled or disabled.
For more information, see Change power mode to optimize performance and battery
life on page 40.
To enable or disable Ethernet:
1. Quickly press and release the Power button to wake your mobile hotspot.
The lock screen displays.
2. Swipe up to unlock your mobile hotspot.
The home screen displays.
3. Tap Settings > More > Ethernet.
The Ethernet page displays.
The icon in the top right corner displays ON or OFF to indicate the current Ethernet
status.
4. Tap the ON or OFF icon.
Your mobile hotspot asks you to confirm that it must restart to enable or disable
Ethernet.
5. Tap Continue.
Your mobile hotspot restarts with Ethernet enabled or disabled.
Adjust network, security, and
performance settings
Nighthawk M6 Pro, Nighthawk M6
50 User Manual