Set Up Plugged-In Mode For Fixed Usage - NETGEAR Nighthawk M6 Pro User Manual

Set up Plugged-In Mode for fixed usage

Removing your Nighthawk M6's battery and plugging it into wall power enables
Plugged-In Mode, which boosts performance and improves WiFi coverage. On M6
Pro models, the max Ethernet port speed is increased as well. See the following table
for differences between models and regions when Plugged-In Mode is activated.
Model Region
M6 US
M6 EU/AU/NZ/HK
M6 Pro US
M6 Pro EU/AU/NZ/HK
*WiFi 6E is restricted to indoor use only in the US. You can only use the 6 GHz band by
connecting your mobile hotspot to the power adapter and enabling 6 GHz WiFi from
the device or web user interface. For more information, see Change WiFi bands or
enable dual-band WiFi on page 38.
Figure 7. Nighthawk M6 fixed setup
Overview and Setup
Nighthawk M6 Pro, Nighthawk M6
WiFi Range
Up to 2000 sq. feet
Up to 90 sq. meters
Up to 2000 sq feet
Up to 90 sq. meters
15
WiFi 6E Ethernet Port Speed
Not Supported 1 Gbps
Not Supported 1 Gbps
Supported* 2.5 Gbps
Supported 2.5 Gbps
User Manual