Configure Website Filters From The Web User Interface - NETGEAR Nighthawk M6 Pro User Manual

To configure access controls from the web user interface:
1. From the web user interface dashboard, select Settings > Security > Access
Controls.
The Access Controls page displays.
2. Select the Enable check box.
3. Using the Filter Type drop-down, select Allow List or Block List.
Depending on your selection, the page displays an Allow List or a Block List.
4. To add a device to the list, click or tap Add.
The Add Device window displays.
5. Enter a Device Name and MAC Address.
6. Click or tap Add.
The device is added to the list.
7. To remove a device from the list, select the device and then click or tap Delete.
The device is removed from the list.
Configure website filters from the
web user interface
You can set up a filter to block or allow access to websites that you specify. You can also
set up a list of devices that are unrestricted. The website filtering does not apply to
unrestricted devices.
To configure website filters from the web user interface:
1. From the web user interface dashboard, select Settings > Security > Website
Filters.
The Website Filters page displays.
2. Select the Enable check box.
3. In the Filter Type menu, select Block List or Allow List.
Depending on your selection, a Blocked Websites list or an Allowed Websites list
displays.
4. To add a website to the list, click or tap Add and enter the website.
The website is added to the list.
5. To edit an entry in the list, do the following:
Access the web user interface
Nighthawk M6 Pro, Nighthawk M6
65 User Manual