Install Or Replace A Sim Card - NETGEAR Nighthawk M6 Pro User Manual

Nighthawk M6 Pro, Nighthawk M6
The Nighthawk M6 connectors are located on the rear panel. The connectors include
a USB Type-C connector, an RJ45 Ethernet port, and two antenna ports.
Figure 4. Nighthawk M6 connectors

Install or replace a SIM card

To use your mobile hotspot, you need to install a valid, activated nano SIM card with a
data plan from your mobile provider. If you change your mobile data provider or plan,
you might need to replace the SIM card that you previously installed.
Overview and Setup 11 User Manual