When you are using an Ethernet connection, you can use the USB type C cable and the AC adapter to
recharge the mobile router battery.
Note
You cannot use an Ethernet connection and use a tethered connection to access the
mobile router at the same time.
For information about offloading data, see
For information about how to use a charge-only tethered connection, see
to Charge Only
on page 23.
•
TS9 antenna connectors. Two SMK-TS9 connectors for an optional MIMO antenna.
For more information about connecting an external antenna, see
Optional Accessories
The following optional accessories are also supported:
•
Optional micro SD card (sold separately)
•
Optional antennas (sold separately)
For more information, visit netgear.com/XXXXaccessories.
Install the Micro SIM Card and the Battery
To obtain an activated micro SIM (3FF format) card, contact AT&T.
Nighthawk LTE Mobile Hotspot Router Model MR1100
Offload Your Mobile Internet Connection
External Antennas
Get Started
11
on page 30.
Use the USB Type C Cable
on page ?.