How To Use Touch 10 - Cisco TelePresence SX10 Quick Set Administrator's Manual

Cisco TelePresence SX10 Quick Set

Introduction

How to use Touch 10

The Touch 10 user interface and its use are described
in full detail in the User guide for the video conferencing
device.
D15330.16 SX10 Administrator Guide CE9.9, OCTOBER 2019.
Configuration Peripherals
Tap the device name or address
to access System Information,
Settings, Restart and Factory
reset. You can also activate Call
forwarding, Standby, and Do not
disturb modes.
Tap Call to make a
call, and to invoke the
Favorites, Directory and
Recents contact lists.
Tap Messages to invoke
the voice mail system, if
available.
Press and hold the
left side of the Volume
button to decrease the
loudspeaker volume and
the right side to increase
the volume.
Maintenance
www.cisco.com — Copyright © 2019 Cisco Systems, Inc. All rights reserved.
179
Administrator Guide
Device settings Appendices Appendices
Tap ? to contact Help desk or access other
facility services, if available.
Tap the Camera icon to activate
self-view and camera control.
Tap Share
sharing content and to
conduct presentations.
Entry point for user interface
extensions (your device
may have zero or more such
buttons with different color,
text and icons).
Press the
button to mute and unmute
microphones.
Time of day.
to start
Microphone