Peripherals Profile Touchpanels - Cisco TelePresence SX10 Quick Set Administrator's Manual

Cisco TelePresence SX10 Quick Set

Introduction

Peripherals Profile TouchPanels

Define the number of Cisco Touch controllers that are expected to be connected to the
device. This information is used by the device's diagnostics service. If the number of
connected Touch controllers does not match this setting, the diagnostics service will report
it as an inconsistency.
Requires user role: ADMIN, INTEGRATOR
Default value: NotSet
Value space: NotSet/Minimum1/0/1/2/3/4/5
NotSet: No touch panel check is performed.
Minimum1: At least one Cisco Touch controller should be connected to the device.
0-5: Select the number of Touch controllers that are expected to be connected to the
device. Note that only one Cisco Touch controller is officially supported.
D15330.16 SX10 Administrator Guide CE9.9, OCTOBER 2019.
Configuration Peripherals Maintenance
www.cisco.com — Copyright © 2019 Cisco Systems, Inc. All rights reserved.
140
Administrator Guide
Device settings Device settings Appendices