Cisco TelePresence SX10 Quick Set
Introduction
NetworkServices UPnP Timeout
Define for how many seconds UPnP shall stay enabled after the device is switched on or
restarted. The NetworkServices UPnP Mode setting must be On for this setting to take any
effect.
Requires user role: ADMIN
Default value: 600
Value space: Integer (0..3600)
Range: Select a value between 0 and 3600 seconds.
NetworkServices Websocket
It is possible to interact with the API of the device over the WebSocket protocol, both the
insecure and secure versions (ws and wss). A WebSocket is tied to HTTP, so that also HTTP
or HTTPS must be enabled before you can use WebSockets (see the NetworkServices
HTTP Mode setting).
Requires user role: ADMIN
Default value: Off
Value space: FollowHTTPService/Off
FollowHTTPService: Communication over the WebSocket protocol is allowed when
HTTP or HTTPS is enabled.
Off: Communication over the WebSocket protocol is not allowed.
NetworkServices WelcomeText
Choose which information the user should see when logging on to the device through
Telnet/SSH.
Requires user role: ADMIN
Default value: On
Value space: Off/On
Off: The welcome text is: Login successful
On: The welcome text is: Welcome to <system name>; Software version; Software
release date; Login successful.
D15330.16 SX10 Administrator Guide CE9.9, OCTOBER 2019.
Configuration
Peripherals
Maintenance
NetworkServices XMLAPI Mode
Enable or disable the device's XML API. For security reasons this may be disabled. Disabling
the XML API will limit the remote manageability with for example TMS, which no longer will
be able to connect to the device.
Requires user role: ADMIN
Default value: On
Value space: Off/On
Off: The XML API is disabled.
On: The XML API is enabled.
www.cisco.com — Copyright © 2019 Cisco Systems, Inc. All rights reserved.
138
Administrator Guide
Device settings
Device settings
Appendices