Cisco TelePresence SX10 Quick Set Administrator's Manual page 7

Cisco TelePresence SX10 Quick Set

Introduction Introduction
TLS configuration changes
(All products)
For security reasons we have made some changes to
the TLS configuration on HTTPS client, syslog, and SIP
connections:
• You must explicitly turn off certificate verification if you
don't want to perform a certificate check. By default,
certificates are checked on all TLS connections.
• The minimum TLS version is increased from version
1.0 to 1.1 (exceptions for CUCM and SIP, which still
allow version 1.0). Also note that the Webex cloud is
using TLS version 1.2.
• You can configure certificate verification for
provisioning, phone book, and other HTTP servers
separately. The former NetworkServices HTTPS
VerifyServerCertificate setting, which covered all
these server types, are replaced by three settings:
Provisioning TLSVerify, Phonebook Server [1] TlsVerify,
and HTTPFeedback TlsVerify.
• You can configure certificate verification for external
logging (both audit logging and regular logging).
• For SIP, the certificates are verified against the
Custom CA list, which is uploaded to the device
manually using the web interface or API. For other
connections, the certificates are verified against either
the Pre-installed CA list on the device, or the Custom
CA list.
D15330.16 SX10 Administrator Guide CE9.9, OCTOBER 2019.
Configuration Peripherals
Updates to whiteboarding and annotations
(Boards)
• Create, edit, and move stickies on your whiteboard
and annotations.
• Choose between three different pen sizes when
whiteboarding and annotating.
• Create copies of whiteboards and annotations. The
whiteboard or annotated snapshot of a presentation is
stored in the Whiteboard menu. You can go back to it
and continue work on the copy as you would on any
other whiteboard or snapshot.
Wired touch redirect
Touch redirect enables you to control your laptop from a
Webex Board screen. You must connect the laptop to the
Webex Board with an HDMI cable (wired sharing) and a
USB-C cable.
Touch redirect only works outside of call.
This feature is only available on the second generation of
boards (Webex Board 55S, 70S, and 85S).
Maintenance
(Boards)
www.cisco.com — Copyright © 2019 Cisco Systems, Inc. All rights reserved.
7
Administrator Guide
Device settings Appendices