Set Strong Security Mode - Cisco TelePresence SX10 Quick Set Administrator's Manual

Cisco TelePresence SX10 Quick Set

Introduction

Set strong security mode

Sign in to the web interface and navigate to
Strong Security Mode.
Set strong security mode
Read carefully about the consequences of strong
security mode before you continue.
1. If you want to use strong security mode, click
Enable Strong Security Mode.... and confirm
your choice in the dialog box that appears.
The device restarts automatically.
2. Change the passphrase when you are
prompted. The new passphrase must meet the
strict criteria as described.
How to change the device passphrase is
described in the ► Change the device
passphrase chapter.
Return to normal mode
Click Disable Strong Security Mode... in order to
restore the device to normal mode. Confirm your
choice in the dialog box that appears.
The device restarts automatically.
D15330.16 SX10 Administrator Guide CE9.9, OCTOBER 2019.
Configuration Configuration Peripherals
Security >
Maintenance
www.cisco.com — Copyright © 2019 Cisco Systems, Inc. All rights reserved.
60
Administrator Guide
Device settings Appendices
About strong security mode
Use strong security mode only when
compliance with DoD JITC regulations is
required.
Strong security mode sets very strict
passphrase requirements, and requires all
users to change their passphrase on the
next sign in.