Cisco TelePresence SX10 Quick Set
Introduction
NetworkServices UPnP Timeout
Define for how many seconds UPnP shall stay enabled after the video system is switched
on or restarted. The NetworkServices UPnP Mode setting must be On for this setting to
take any effect.
Requires user role: ADMIN
Default value: 600
Value space: Integer (0..3600)
Range: Select a value between 0 and 3600 seconds.
NetworkServices Websocket
It is possible to interact with the API of the video system over the WebSocket protocol,
both the insecure and secure versions (ws and wss). A WebSocket is tied to HTTP, so
that also HTTP or HTTPS must be enabled before you can use WebSockets (see the
NetworkServices HTTP Mode setting).
Requires user role: ADMIN
Default value: Off
Value space: FollowHTTPService/Off
FollowHTTPService: Communication over the WebSocket protocol is allowed when
HTTP or HTTPS is enabled.
Off: Communication over the WebSocket protocol is not allowed.
NetworkServices WelcomeText
Choose which information the user should see when logging on to the codec through
Telnet/SSH.
Requires user role: ADMIN
Default value: On
Value space: Off/On
Off: The welcome text is: Login successful
On: The welcome text is: Welcome to <system name>; Software version; Software
release date; Login successful.
D15330.14 SX10 Administrator Guide CE9.7, APRIL 2019.
Configuration
Peripherals
Maintenance
NetworkServices XMLAPI Mode
Enable or disable the video system's XML API. For security reasons this may be disabled.
Disabling the XML API will limit the remote manageability with for example TMS, which no
longer will be able to connect to the video system.
Requires user role: ADMIN
Default value: On
Value space: Off/On
Off: The XML API is disabled.
On: The XML API is enabled.
www.cisco.com — Copyright © 2019 Cisco Systems, Inc. All rights reserved.
124
Administrator Guide
System settings
System settings
Appendices