Networkservices Telnet Mode; Networkservices Upnp Mode; Networkservices Upnp Timeout; Networkservices Websocket - Cisco TelePresence SX10 Quick Set Administrator's Manual

Cisco TelePresence SX10 Quick Set

Introduction

NetworkServices Telnet Mode

Telnet is a network protocol used on the Internet or Local Area Network (LAN) connections.
Requires user role: ADMIN
Default value: Off
Value space: Off/On
Off: The Telnet protocol is disabled. This is the factory setting.
On: The Telnet protocol is enabled.

NetworkServices UPnP Mode

Fully disable UPnP (Universal Plug and Play), or enable UPnP for a short time period after
the video conferencing device has been switched on or restarted.
The default operation is that UPnP is enabled when you switch on or restart the video
conferencing device. Then UPnP is automatically disabled after the timeout period that is
defined in the NetworkServices UPnP Timeout setting.
When UPnP is enabled, the device advertises its presence on the network. The
advertisement permits a Touch controller to discover video conferencing devices
automatically, and you do not need to manually enter the device's IP address in order to pair
the Touch controller.
Requires user role: ADMIN
Default value: On
Value space: Off/On
Off: UPnP is disabled. The video conferencing device does not advertise its presence,
and you have to enter the device's IP address manually in order to pair a Touch controller
to the device.
On: UPnP is enabled. The video conferencing device advertises its presence until the
timeout period expires.
D15330.18 SX10 Administrator Guide CE9.12, APRIL 2020.
Configuration Peripherals Maintenance

NetworkServices UPnP Timeout

Define for how many seconds UPnP shall stay enabled after the device is switched on or
restarted. The NetworkServices UPnP Mode setting must be On for this setting to take any
effect.
Requires user role: ADMIN
Default value: 600
Value space: Integer (0..3600)
Range: Select a value between 0 and 3600 seconds.

NetworkServices Websocket

It is possible to interact with the API of the device over the WebSocket protocol, both the
insecure and secure versions (ws and wss). A WebSocket is tied to HTTP, so that also HTTP
or HTTPS must be enabled before you can use WebSockets (see the NetworkServices
HTTP Mode setting).
Requires user role: ADMIN
Default value: Off
Value space: FollowHTTPService/Off
FollowHTTPService: Communication over the WebSocket protocol is allowed when
HTTP or HTTPS is enabled.
Off: Communication over the WebSocket protocol is not allowed.

NetworkServices WelcomeText

Choose which information the user should see when logging on to the device through
Telnet/SSH.
Requires user role: ADMIN
Default value: On
Value space: Off/On
Off: The welcome text is: Login successful
On: The welcome text is: Welcome to <system name>; Software version; Software
release date; Login successful.
www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
141
Administrator Guide
Device settings Device settings Appendices