Table of Contents
Advertisement
Communication
Communication
To access the PC Communication set up select the line displaying the "PC Communication setup" and
click on the "Go" button. The following display should appear.
Be sure to set up Communications before operating the actuator with the PC. Settings must match those
of the actuator. Once settings match, you can change them.
Prompt
PC Comm Port
Device Address
Baud Rate
6
Selections or
Range of Setting
COM1
This is the COM port of the PC to which the actuator is
connected.
COM2
Note: It can be an actual serial port on the PC or a virtual
COM3
serial port created by using an USB to serial adapter. The
virtual serial port can be assigned any number from 1 to 8
COM4
depending upon the usage.
COM5
COM6
COM7
COM8
1-99
Address of the actuator
Baud rate of the actuator
2400
4800
9600
19200
HercuLink™ PC - User Manual
Parameter Definition
Release 1
8/06
Advertisement
Table of Contents
