Table of Contents
Advertisement
Step
6
Click the "Function" button to access the "Apply Motor Hi" Calibration state.
The motor can be positioned to its high limit by using the Incr + 10% as a coarse adjust. Click
it several times to get as close to the actual position desired. Then click the Increment button
to fine-tune the final high calibration point. The motor can also be positioned with the optional
auto/manual switch on the side of the unit, or with the optional handwheel.
Note: If at any time an error message is observed, this is an indication that
communications between the PC and the unit have been lost. To check
communications, see Preparation on page 1.
Release 1
8/06
Action
HercuLink™ User Manual
Calibration
25
Advertisement
Table of Contents
