Manual Position
Step
2
The value shown on the top line is the current motor position. To move it in either direction
click one of the "Inc / Dec" buttons.
When the motor positioning has been completed, click the "Function" button. If the unit was in
AUTO mode before manual positioning was started, it will be placed back into AUTO mode. If
the unit was in MAN mode it will stay in MAN mode. Click the "Close" button to return to Home
page.
ATTENTION: If you click the "Close" button without clicking the "Function" button, the unit will
remain in MAN mode. To change to AUTO mode, go to Main menu, Configuration, Lockout,
and then select MODE CHG.
52
Action
HercuLink™ PC - User Manual
Release 1
8/06