Honeywell HercuLink HercuLine 2000 Series User Manual page 37

Calibration
Step
3
Select the "Output" prompt from the list of calibration functions.
The functionality of each button is described below:
Setup – Has no functionality in the output calibration procedure.
Function – Sequences you through the calibration states.
Incr + 10% – Causes the output count value to increase 10% from its current count value.
Decr – 10% – Causes the output count value to decrease 10% from its current count value.
Increment – Causes the output count value to increase by 1 from its current count value.
Decrement – Causes the output count value to decrease by 1 from its current count value.
Close – Exits from the output calibration.
28
Action
HercuLink™ PC - User Manual Release 1
8/06