Audible Alarms; Specifications - Honeywell Xtralis FAAST FLEX FLX-010 Product Manual

FAAST FLEX
ALARM 2
ALARM 1
ACTION 1
ACTION 2
Standard Mounting
2.4

Audible Alarms

The FAAST FLEX has a buzzer that provides the following audible feedback:
Buzzer will sound whenever the user presses a button. This is the default configuration and it can be
l
disabled with the Silence button (See section 6.3 WAIT Mode).
Buzzer will sound for 0.5 seconds when the NORMALIZE procedure is completed (See section 6.3.4
l
Normalize).
Buzzer will sound for 0.5 seconds when a data log file or a DIAGTEST.txt has been written to the USB
l
drive (See section 6.3.8 Test Mode).
Buzzer will sound for 0.5 seconds when the cover is opened or closed and there is a conflict between the
l
DIP switch settings and the current device configuration (for example, if a DIP switch has been
accidentally changed).
Buzzer will sound for 0.5 when the detector is connected / disconnected to SMARTCONFIG (Bluetooth
l
App).
Buzzer will sound for 0.5 when the passcode recovery procedure is done.
l
2.5

Specifications

Specification
Electrical Characteristics
Voltage Range
Supply Current
(@24 VDC 25°C)
General Purpose Input
(GPI)
Relay Contact Ratings
Environmental Ratings
Operating Conditions
www.xtralis.com
POWER
FAULT
Figure 2-3: FAAST FLEX Indicator LEDs
Table 2-2: FAAST FLEX Detector Specifications
18-30 VDC (24 V Nominal)
Single Channel Model: 200 mA (typical) 400 mA (max) @ 24V
Dual Channel Model: 220 mA (typical) 450 mA (max) @ 24V
Activation Time 2s (min)
2.0 A @ 30 VDC, 0.5 A @ 30 VAC
Temperature:
Ambient: -40 °C to 55 °C (-40°F to 131°F)
l
Sampled Air: -40 °C to 55 °C (-40°F to 131°F)
l
Humidity:
10-93% RH, non-condensing
l
FAAST FLEX Product Guide
POWER
FAULT
Inverted Mounting
Value
ALARM 2
ALARM 1
ACTION 1
ACTION 2
6