Alarms - Honeywell GasAlert Extreme User Manual

Alarms

Table 6 describes detector alarms and corresponding screen. During an alarm condition, the detector activates the backlight and the LCD displays the
current ambient gas reading.
To change the factory-set alarm setpoints, refer to
Low Alarm:
• Slow beep
• Slow flash
• ALARM flashes
• Slow vibrations
High Alarm:
• Fast beep
• Fast flash
• ALARM flashes
• Fast vibrations
Sensor Alarm:
• Slow beep
• Slow flash
• ALARM flashes
• Slow vibrations
Calibration and Setting Alarm
Alarm
Setpoints.
Table 6. Alarms
Display
TWA Alarm:
• Slow beep
• Slow flash
• ALARM flashes
• Slow vibrations
STEL Alarm:
• Fast beep
• Fast flash
• ALARM flashes
• Fast vibrations
Low Battery Alarm:
• One beep and one flash every
5 seconds, and one quick vibration
every minute (when confidence
beep is disabled).
• If confidence beep is enabled no
beeps, flashes, or vibrations
• LOW
Alarm
displays
GasAlert Extreme
Alarms
Display
26