Honeywell Xtralis FAAST FLEX FLX-010 Product Manual page 46

FAAST FLEX
Log example and interpretation
The log header is an important part of the log file as it gives general details about the detector model,
manufacturing date, configuration mode and relay status, below is the list of sections in the log header:
INFO: this section gives general details about the model, the firmware version serial number, etc.
l
Manufacturing date GMT: this section shows the manufacturing date in the GMT timezone.
l
SETTINGS: this section shows details about the configuration mode, alarm and action levels, GPI state,
l
aspiartor speed, etc.
STATE: this section records the instantaneous status of the detector.
l
HEADER reading for salient data: document downloaded from device in date Aug. 24 2022, is a single
channel manufactured in date April, 25 2022 following EN54-20 standard, DIP switches configuration is
0111111110, reference flow 24 l/min, GPI unbalanced.
LOG Desc
Row 1) device power ON
Row 2) Alarm CH1 smoke level passed from 50 to 200,
Row 3) Exit from alarm CH1
Row 4) Front cover opened by operator
Row 5) Log requested -pushed button enter-
Row 6) Log downloaded on USB stick.
www.xtralis.com
Figure 6-6: Sample Event Log
FAAST FLEX Product Guide
39