Optimize Mobile Network Connectivity; Arlo Go Camera Position - NETGEAR Arlo Go User Manual

• Notifications are sometimes delayed.
• Your battery depletes more quickly than usual because your camera spends so
much time attempting to reconnect to the network.

Optimize Mobile Network Connectivity

¾ To optimize mobile network connectivity for your Arlo Go camera:
1. Check the AT&T nationwide coverage map for the area in which you want to
use your Arlo Go camera.
AT&T's Wireless Coverage map
Visit
Domestic.
Note: Cellular coverage fluctuates based on network traffic and weather
conditions. If you place your Arlo Go camera near the edge of a coverage area,
your connection weakens or drops whenever the AT&T network is carrying a
lot of traffic in that area. Heavy rain, thunderstorms, and high humidity can also
weaken your Arlo Go's mobile network connection.
2. Check the mobile network signal strength in the place where you want to put
your Arlo Go camera.
The easiest way to do this is to go there and check the signal strength on an
AT&T mobile phone. If signal strength is good enough, you can set up your Arlo
Go camera and look at your Arlo Go's signal strength in the camera's settings.
Note:
As long as you are using your Arlo Go camera in the United States, you do not need
to turn on roaming unless an AT&T representative instructs you to turn it on.

Arlo Go Camera Position

When placing your Arlo Go camera, keep these tips in mind:
• Avoid placing the camera in an area that gets a lot of light shining directly into
the camera lens.
• You can move and zoom the field of view.
• Keep active locations in the camera's field of view.
Arlo Go provides a 130-degree viewing angle. Position your camera so that the
space you want to monitor is within the camera's field of view.
Set Up Your System
and select the Data radio button under
14