Operation - Black & Decker BCL101 Instructions Manual

ENGLISH
Gopak tool terminal cap (Fig. E)
A battery storage and carrying cap (10) is
provided for use whenever the battery is
out of the tool. Remove the cap as shown in
Figure E before placing battery onto tool.
Fig. E

Operation

Warning: To reduce the risk of serious
personal injury, turn unit o and remove the
battery pack before making any
adjustments or removing/installing
attachments or accessories. An accidental
start-up can cause injury.
Installing and removing the gopak 2 in
1 battery in a power tool (Fig. F)
Warning: Remove any connected USB
cords from the BLACK+DECKER GoPak 2 in
1 battery before connecting the GoPak to
the compatible tool.
1. Remove the tool terminal cap if installed
on the BLACK+DECKER GoPak 2 in 1
battery.
2. To power a compatible GoPak 12V MAX*
power tool, align the tool terminals on
the foot of the tool with the terminal
slots on the battery (4) as shown in Fig.
F.
Note: The state of charge indicator will face
the rear of the tool and the USB ports will
face the front. The arrow on the battery will
align with the arrow on the tool as shown in
Fig. F.
3. Snap the BLACK+DECKER GoPak 2 in 1
battery into the foot of the tool. The
arrow (13) on the battery will align with
the arrow (12) on the tool. Ensure the
battery is fully seated and fully latched
into position before using.
8
All manuals and user guides at all-guides.com
(Original instructions)
10
4. To remove the BLACK+DECKER GoPak 2
in 1 battery from the tool, depress the two
battery release buttons (5) located on the
tool and pull the BLACK+DECKER GoPak
2 in 1 battery o the tool.
Note:The BLACK+DECKER GoPak 2 in 1
battery USB ports are disabled when the
trigger is pulled.
Fig. F
12
13
Using the gopak 2 in 1 battery to
charge your usb device (Fig. G)
Plug the USB A end of your device specific
cable (11) into the BLACK+DECKER GoPak 2
in 1 battery (14) and the other end of the
cable into a UL or CSA listed compatible
device (Phone/Tablet/MP3/Wearable/Game
Controller/etc.). Charging will start
automatically.
Fig. G
11
Functionality
The BLACK+DECKER GoPak 2 in 1 battery
can power your compatible BLACK+DECKER
12V GoPak MAX* tools or power/charge your
mobile devices. The compact, slim battery
housing is designed for portability.
5
4
14