Troubleshooting; Maintenance - Black & Decker BCL101 Instructions Manual

ENGLISH

Troubleshooting

1. The GoPak will not power your device or
charge.
a. The LED closest to the state of charge
button will blink red when attempting
USB functionality.
-- The GoPak is too hot or too cold. Allow
the GoPak to cool down or warm up.
2. The GoPak will not power your
compatible tool.
-- Attempt to charge the battery. If the LED
fails to come on refer to number 1 in
Troubleshooting.

Maintenance

Warning: To reduce the risk of serious
personal injury, turn unit o and remove the
battery pack before making any
adjustments or removing/installing
attachments or accessories. An accidental
start-up can cause injury.
Important: To assure product SAFETY and
RELIABILITY, repairs, maintenance and
adjustment should be performed by
authorized service centers or other qualified
service organizations, always using identical
replacement parts.
Cleaning
Warning: Never use solvents or other harsh
chemicals for cleaning the non-metallic
parts of the tool or power supply. These
chemicals may weaken the plastic materials
used in these parts. Use a cloth dampened
only with water and mild soap. Never let any
liquid get inside the tool or power supply;
never immerse any part of the tool or power
supply into a liquid.
Note: Remove tool and both USB cables
from GoPak before cleaning.
Use only mild soap and a damp cloth to
clean the tool or power supply. Many
household cleaners contain chemicals which
could seriously damage plastic. Also, do not
use gasoline, turpentine, lacquer or paint
thinner, dry cleaning fluids or similar
products.
Repairs
The BLACK+DECKER GoPak 2 in 1 battery is
not serviceable.
Warning:To assure product SAFETY and
RELIABILITY, repairs, maintenance and
adjustment (including brush inspection and
10
All manuals and user guides at all-guides.com
(Original instructions)
replacement) should be performed by a
BLACK+DECKER factory service center or a
BLACK+DECKER authorized service center.
Always use identical replacement parts.
Accessories
Warning: Since accessories, other than those
o ered by BLACK+DECKER have not been
tested with this product, use of such
accessories with this tool could be
hazardous. To reduce the risk of injury, only
BLACK+DECKER recommended accessories
should be used with this product.
Recommended accessories for use with your
tool are available at extra cost from your
local dealer or authorized service center. If
you need assistance in locating any
accessory, please contact BLACK+DECKER,
call 1-800-544-6986.
Protecting the environment
Separate collection. This product
must not be disposed of with normal
household waste.
Should you find one day that your
BLACK+DECKER product needs
replacement, or if it is of no further use to
you, do not dispose of it with household
waste. Make this product available for
separate collection.
Separate collection of used products
and packaging allows materials to be
recycled and used again. Reuse of
recycled materials helps prevent
environmental pollution and reduces the
demand for raw materials.
Local regulations may provide for separate
collection of electrical products from the
household, at municipal waste sites or by
the retailer when you purchase a new
product.
BLACK+DECKER provides a facility for the
collection and recycling of BLACK+DECKER
products once they have reached the end of
their working life. To take advantage of this
service please return your product to any
authorised repair agent who will collect
them on our behalf.
You can check the location of your nearest
authorised repair agent by contacting your
local BLACK+DECKER o ce at the address
indicated in this manual. Alternatively, a list
of authorised BLACK+DECKER repair
agents and full details of our after-sales
service and contacts are available on the
Internet at: www.2helpU.com.