Druck ADTS 2XX Calibration Manual
CONDITIONS OF USE
The ATEX certified Advanced Hand Terminal can be used in zone
accordance with the ATEX certification document and schedule.
Marking detail:
Refer to Advanced Hand Terminal User Manual K0418 and the label on the Advanced Hand
Terminal.
SPECIAL CONDITION OF USE
•
The power supplies must be isolated when connecting the advanced hand terminal in the
hazardous area.
•
The advanced hand terminal must not be disconnected when energized in the hazardous
area.
•
The advanced hand terminal is a non-serviceable component. If the advanced hand terminal
becomes unserviceable it can only be replaced by another ATEX compliant hand terminal.
Note:
The advanced hand terminal must only be used with the cable assembly supplied and marked "DO NOT
SEPARATE WHILST ENERGISED IN HAZARDOUS AREA"
*
Zone 2 hazardous area definition, see User Manual K0417 or User Manual K0451.
K0425 Issue No. 2
ATEX C
A
ERTIFIED
DVANCED
H
T
AND
ERMINAL
2*
hazardous areas in
iv