Advanced Task; General; Select Input; Ambient Temperature Measurement - GE Druck DPI 610 User Manual

Advanced Task

General

Advanced task allows the user to configure the instrument to monitor one of a number of
different input measurements and outputs (sources). Additionally, five process functions,
Tare, Max/Min, Filter, Flow and % Span can be applied to the input functions.

Select Input

To display an input channel, select ADVANCED task from the task menu. The display
shows the list of the input selections and, if available, the PROCESS soft box (F1) and the
UNITS soft box (F2).
The following procedure shows the method of input channel selection and the method of
changing units:
INPUT
SELECTIONNER
ENTREE
INPUT
SELECTIONNER
ENTREE
Note: Left/right arrow keys function as page up/down keys.
Refer to pages 21 to 24 for details of process functions.

Ambient Temperature Measurement

To set-up the instrument to read ambient temperature, proceed as follows:
INPUT
SELECTIONNER
ENTREE
Note: Make sure the temperature reading has stabilized.
K415 Issue No. 1
SELECT ENTREE
PRESSION INT
PRESSION
EXT
TENSION
COURANT
TEMPERATURE
PROCESS UNITES
SELECT ENTREE
PAS D'ENTREE
PROCESS UNITES
SELECT ENTREE
PRESSION INT
PRESSION
EXT
TENSION
COURANT
TEMPERATURE
PROCESS UNITES
CHOIX UNITES
DE PRESSION
inHg
bar
hPa
Pa
SELECTIONNER
UNITES DE
TEMPERATURE
CELSIUS
FAHRENHEIT
20
Select Input
SELECTIONNER
UNITES
SELECTIONNER
UNITES