Advanced: Calibration Options - GE Druck DPI 620 User Manual

Settings
1
TAP
2.12 The Advanced
menu options
2
1
TAP

2.12.1 Advanced: Calibration options

Menu to calibrate the
DPI 620
1
2
TAP
[EN] English - K0449
You can use the Observed function to make a manual record of
the readings you can see on another instrument. For example,
you can make a permanent record of the readings with
Data Logging (Chapter
These settings are available:
Description
Values to set:
Units (enter a name for the units)
Resolution (Set one of the 7 options: 1.0 to 0.000001)
Use this button (Setpoint) to set the values you see on the
other instrument.
The Advanced menu lets you set or use these options:
•
HART resistor
•
Standards
3
There are two calibration menus you can use:
1. Enter the calibration PIN: 4321
2. Tap the "Accept" button. You can then continue with these
operations:
•
Calibrate the different measure and source channels on the
DPI 620 calibrator.
Contact us at: www.gesensinginspection.com
•
Change the calibration PIN. You must confirm the new PIN.
6).
•
Calibration
•
Setup Files
Set On or Off; see Chapter 8
Set the applicable temperature scale for all
temperature operations; see
Options: IPTS 68 or ITS 90.
See Section 2.12.1
See Section 2.12.2
Prepare the instrument 2-17
Issue 1
Chapter 3