Set Up Fingerprint Unlock; Remove Fingerprint Unlock - Honeywell CT47 Series User Manual

Set Up Fingerprint Unlock

You can unlock the computer in sleep mode by using the fingerprint sensor. A
series of on-screen prompts guide you through the process of capturing a
fingerprint image that you can use to unlock the computer.
Note: When fingerprint unlock is enabled, you must also have a backup method to unlock
the computer, such as PIN, pattern, or password.
1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap Settings
3. If you have not set up a screen lock, you will be prompted to add a backup
4. Follow the on-screen prompts to complete the setup. You must press your
You can add multiple fingerprint images. To add an additional fingerprint image,
tap Add fingerprint.

Remove Fingerprint Unlock

To remove fingerprint unlock, you can delete all fingerprint images on the
computer or remove the screen lock.
To remove a screen lock, see
page 13.
To delete a fingerprint:
1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap Settings
3. Enter the PIN, pattern, or password that is used as a backup method for
4. Tap the delete icon next to the fingerprint you want to delete.
5. Confirm that you want to delete the fingerprint.
14
> Security > Fingerprint.
method for unlocking the computer: PIN, pattern, or password.
finger firmly on the fingerprint sensor and capture multiple areas of your finger.
> Security > Fingerprint.
unlocking the computer.
Change the Screen Lock to Protect the Computer
CT47 Mobile Computer Series User Guide
on