Power On The Computer; Welcome Screen; Unlock The Screen - Honeywell CT40 User Manual

3. Tap the toggle button next to Airplane mode. An airplane icon

Power On the Computer

After you have fully charged and installed a battery, power on the computer for the
first time:
•

Welcome Screen

The first time you power on the computer, a Welcome screen appears. You can
either scan a configuration barcode or use the Wizard to manually set up the
computer. To learn more about how to
about configuring multiple devices using Wi-Fi Staging app, see page 82.
During the manual setup process, follow the prompts on the screen as the wizard
has you:
•
•
•
•
•
Once you complete the initial setup, the Welcome screen no longer appears when
you power on the computer and Provisioning mode is automatically turned Off
(disabled). Scanning a barcode to install applications, certificates, configuration
files, and licenses on the computer is restricted when Provisioning mode is turned
Off. To learn more

Unlock the Screen

The screen lock automatically activates every time the computer is turned on or
when the computer wakes from sleep mode.
•
The level of security provided depends on the type of lock set (e.g., Swipe, Pattern,
PIN, or Password). The default setting (Swipe) provides no protection against
unauthorized access to your computer.
16
the status bar to indicate Airplane mode is turned on.
Press and hold the Power button for approximately 3 seconds, and then release
the button.
Set the default language.
Set up the Wi-Fi network connections.
Set the time, date, and time zone.
Personalize (name) the computer.
Set up security and privacy options.
About Provisioning Mode
Swipe up from the lock icon at the bottom of the screen.
Scan Barcodes, see
see
CT40/CT40 XP Mobile Computer Series User Guide
page 47. To learn more
page 81.
appears in