Replace The Battery - Honeywell CT47 Series User Manual

To activate Swap Battery mode:
1. Press and hold the Power button until the options menu appears.
2. Touch Swap Battery and follow the on-screen instructions.
3. Once you replace the battery, press the Power button.

Replace the Battery

Caution: Improper battery replacement or incompatible device usage may
Remove the battery
1. Depending on the model type, either power Off the computer or place it in Swap
2. Release the hand strap.
3. Unlock the battery. Press and hold down the small button on the battery latch,
6
result in risk of burns, fire, explosion, or other hazard. Dispose of
lithium-ion batteries according to local regulations. Risk of fire and
burns if improperly handled. Do not open, crush, heat above 60°C
(140°F), or incinerate.
Battery mode. See Before Attempting to Remove the Battery
and then slide the latch toward the unlock icon. The battery will pop-up slightly
on the edge when the latch is released.
CT47 Mobile Computer Series User Guide
on page 5.