Table of Contents
Advertisement
Setting
Preferred
Symbology
Settings
Imager Settings
You should not need to modify the Imager Settings. The Override Recommended
Values setting is disabled by default. The recommended Imager Settings are
designed to work in a wide range of environments and should only be modified if
you have an advanced understanding of imagers.
Trigger Settings
Use the Trigger Settings to configure how the scan buttons work.
Trigger Settings
Setting
Enable Scan
Trigger
Scan delay
Decode Timeout
42
Description
Use this setting to establish which barcode has priority if more
than one barcode appears on the same label.
•
Tap the check box to toggle the feature On or Off.
•
Select Preferred Symbology Settings to adjust the
feature parameters.
Options include:
•
Preferred Symbology
Set the priority level (High or Low) for symbology codes.
This is used when you want to specify one symbology as a
higher priority over other symbologies in situations where
both barcode symbologies appear on the same label, but
the lower priority symbology cannot be disabled. If a code
is set as a High Priority, the decode of that symbology is
accepted immediately. If a code is set as a Low Priority, the
decode is buffered to see if a decode of a preferred High
Priority symbology can be found within a given timeout
period.
•
Preferred Timeout (ms)
The length of time the scanner will ignore a low priority
barcode while it searches for a high priority barcode. If a
high priority symbology is located during this period, then
that data is read immediately. If the time-out period expires
before a high priority symbology is read, the scanner will
read any barcode in its view. The default is 500ms.
Description
Enable or Disable activating the imager by pressing the side scan
buttons or the virtual Scan button in the Scan Demo app.
Set the minimum amount of time in seconds before the scanner
can read another barcode.
Set the number of seconds before the scanner automatically turns
Off if the scan button is pressed and nothing has successfully
decoded.
CT47 Mobile Computer Series User Guide
Default
Disabled
Default
Enabled
0
20
Advertisement
Table of Contents
