Table of Contents
Advertisement
Note: On CT47 WWAN models with an eSIM instead of a second nano-SIM socket, the eSIM
is SIM 2. For more information, see
6. Close the SIM card access door.
7. Optional. Install the tamper-resistant screw to secure the access door.
8. Install the battery. Refer to
9. Follow your phone carrier instructions for activation and connection to a mobile
52
b. SIM 2 (model dependent): Slide the nano-SIM card into the card socket.
network. By default, the nano-SIM card installed in SIM 1 is assigned to SIM
Slot 1, which is used for phone activation.
Provision eSIM
Install the Battery
on page 7.
CT47 Mobile Computer Series User Guide
on page 53.
Advertisement
Table of Contents
