Table of Contents
Advertisement
Unpair a Paired Scanner
You can unpair the scanner to remove it from the Connected Device list.
1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap Scanner Edge
3. Tap the menu icon
4. Tap Honeywell or Intermec.
5. Scan the Disconnect Barcode displayed on screen.
About Ethernet and USB Communications
You can use these optional CT47 series accessories to transmit data to and receive
data from another device using an Ethernet or USB cable connection:
•
•
•
•
Accessory documentation is available for download from the CT47 product page at
sps.honeywell.com.
For a complete list of compatible accessories for your mobile computer and their
part numbers, see the Accessory Guide available for download at
sps.honeywell.com.
Contact your local sales representative for ordering information.
USB Troubleshooting
•
•
82
Home Bases
Ethernet Home Bases
Display Docks
Snap-on Cup (USB)
If you have a problem with your workstation computer recognizing the USB
device, try downloading and installing the Honeywell-aidc-usb-driver. The
driver is part of the Honeywell_Mobility SDK_Android software.zip file. To learn
where to get the software, see
Check to make sure you have enabled the USB for file transfer. To learn more, see
Configure USB Connection and Transfer Files
.
and then tap Disconnect BT Scanner.
Developer Information
CT47 Mobile Computer Series User Guide
on page 84.
on page 21.
Advertisement
Table of Contents
