Battery Replacement; Replace The Battery - Honeywell ScanPal EDA57 User Manual

Hide thumbs Also See for ScanPal EDA57:
Table of Contents

Advertisement

Battery Replacement

If your battery power is low, you need to either charge the battery in the computer
or replace it with a charged battery.

Replace the Battery

Caution: Improper battery replacement or incompatible device usage may
Remove the Battery
1. Press and hold the Power button until the options menu appears.
2. Tap Power off.
3. Release the hand strap.
4. Unlock the battery cover. Press and hold down the small button on the battery
6
result in risk of burns, fire, explosion, or other hazard. Dispose of
lithium-ion batteries according to local regulations. Risk of fire and
burns if improperly handled. Do not open, crush, heat above 60°C
(140°F), or incinerate.
latch and then slide the latch to the right.
EDA57 User Guide

Advertisement

Table of Contents
loading

This manual is also suitable for:

Eda57-1

Table of Contents