Cisco Codec C Series Getting Started Manual page 24

Cisco TelePresence Video Systems
Contents
Provisioning set-up
(when using a provisioning system)
if in doubt for any of the parameters below, contact your
provisioning system provider.
See the administrator guide for your product to find more
information about the provisioning settings.
Select provisioning infrastructure
1. Go to the Configuration tab and click
2. open the Provisioning settings from the left column.
3. Select a provisioning infrastructure in the
list:
• tMS – Cisco telePresence Management System
• VCS – Cisco Video Communication Server (only available
for eX Series and MX series)
• Callway –Webex telepresence
• CuCM – Cisco unified Communications Manager
• Auto - the system starts provisioning by first trying VCS,
then tMS and finally CuCM.
if you select Off, all configurations must be set manually on
the video system.
If you are changing a value setting,
you have to always click save to confirm the change.
Back to task overview
D14639.09 Video Systems Getting Started Guide TC6.1, April 2013.
Introduction User interfaces
Set the required provisioning parameters
Which parameters to set depend on which infrastructure was selected.
TMS
1. it may be required to authenticate the video system with
Cisco tMS. if so, enter
respective input fields.
System Configuration.
2. enter the iP address or dNS name of the Cisco tMS server in
the Address
3. enter the
Mode drop down
sponding input
VCS (for EX Series and MX Series only)
1. it may be required to authenticate the video system with
the Cisco VCS. if so, enter
the respective input fields.
2. enter the iP address or dNS name of the Cisco VCS in the
Address
3. enter the SiP
sponding input
Have a look at the
and MX Series
provisioning.
Confirguration Configuration
LoginName and Password
input field under the ExtermalManager heading.*
Path to the provisioning service in the corre-
field.
LoginName and Password
input field under the ExtermalManager heading.
Domain for the Cisco VCS in the corre-
field.
Cisco VCS provisioning for eX Series
appendix for more information about VCS
24
Appendices
Webex Telepresence (formerly Callway)
upon ordering the Cisco Webex telepresence service, you
in the have received a Video number
Please contact your company's Webex telepresence admin-
istrator if you do not have a video phone number and an
activation code.
1. enter the Video number in the
2. enter the Activation code in the
CUCM
1. enter the iP address or dNS name of the uCM provisioning
in
server in the Address input field under the
heading.*
You can find more details about setting up Cisco uCM provi-
sioning in the Administering TC endpoints on CUCM guide.
*
the dHCP server can be set up to provide the external Manager
address automatically (option 242 for tMS; option 150 for uCM). Any
input in the input field overrides the setting provided by dHCP.
Copyright © 2010–2013 Cisco Systems, Inc. All rights reserved.
Getting Started Guide
Contacts
and an Activation code.
LoginName input field.
Password input field.
ExtermalManager