Cisco Codec C Series Getting Started Manual page 22

Cisco TelePresence Video Systems
Contents
Setting the Administrator Settings
menu password
When starting up the system for the first time the Administrator
Settings menu password is not set.
A warning on the screen of your video system indicates if no
administrator password is set. to remove the warning you
must set an administrator password. if you wish to remove
the warning without setting a password, you can leave the
password field blank, though this is not advisable.
NoTe: We strongly recommend that you define a password to
protect the Administrator Settings menu, since these settings
affect the behavior of the video conference system.
1. Go to Home > Settings > Administrator settings > Set
menu password.
on the remote control, press the # key to toggle between
lower or upper case characters and numbers: abc/ABC/123.
2. enter the menu password. the password you enter is
hidden; each character is replaced with an asterisk (*).
3. Select Save to save the changes, or Cancel
saving.
4. Press Home ( ) to exit.
Back to task overview
D14639.09 Video Systems Getting Started Guide TC6.1, April 2013.
Introduction User interfaces
to leave without
Confirguration Configuration
22
Getting Started Guide
Appendices Contacts
Copyright © 2010–2013 Cisco Systems, Inc. All rights reserved.