Dumping Objects - Makita DCU603 Instruction Manual

When loading objects on the carrier, secure the objects
with ropes and tie them down to the rope hooks of the
carrier.
Fig.57
► 1. Rope hook

Dumping objects

CAUTION:
Before lifting the carrier or bucket,
be sure to lock the brake lever.
Lift the carrier or bucket on flat
CAUTION:
and stable ground. Operation on unstable ground
may cause an accident or injury.
CAUTION:
Keep the load to a minimum. If
the load is large, do not try to lift the carrier or
bucket. Reduce the load, and then lift the carrier
or bucket.
CAUTION:
When lifting or returning the car-
rier or bucket, never insert or place a part of your
body between the dump unit and the carrier or
bucket.
If the load is fixed by ropes or
CAUTION:
other means, untie the load before lifting the
dump unit.
CAUTION:
Before lifting the carrier or bucket,
make sure that there are no people or obstacles
around the machine.
You can dump the objects by lifting and tilting the carrier
or bucket.
1. Stop the machine, and then lock the brake lever.
NOTICE:
It is recommended to chock the front
wheels to stabilize the machine.
2. Rotate the lock lever of dump unit toward the front
of machine to unlock the dump unit.
Fig.58
► 1. Lock lever
3. Stand at the side of the machine, then hold the
handle of the machine with one hand, and then hold the
handle of the dump unit with the other hand.
1
Fig.59
CAUTION:
and dump unit firmly, and work in a stable
posture.
4. Tilt the carrier or bucket by lifting up the handle of
the dump unit.
5. Return the carrier or bucket, and then lock the
dump unit by pulling down the handle of the dump unit.
CAUTION:
lock the dump unit by returning the dump unit to
its original position.
24 ENGLISH
1
Hold the handles of the machine
After dumping loads, be sure to