Operation; Operating The Machine - Makita DCU603 Instruction Manual

3. Lock the other rear wheel in the same way.
4. Move the rear wheel back and forth or left and
right slightly to make sure it is locked.
To release the rear wheel lock, rotate the rear wheel
lock 90° as shown in the figure.
Fig.48
► 1. Rear wheel lock
NOTE: The rear wheels can be fixed in 4 different
directions as shown in the figure.
Fig.49
Using the level
Using the level, you can check if the ground is level.
1
Fig.50
► 1. Level

OPERATION

CAUTION:
before loading, unloading, and dumping objects,
or draining liquid.

Operating the machine

NOTICE:
the operation. If the lock key is not inserted, a beep
sound is emitted when you pull the switch trigger. The
beep sound stops by releasing the switch trigger and
pulling the brake lever.
NOTICE:
ating the machine by referring to the section for
maintenance.
1. Make sure that the brake lever is locked. Install the bat-
tery cartridges, and insert the lock key and turn it clockwise.
2. Select the battery cartridges with the battery selection switch.
3. Press the power button on the control panel to turn
the power on.
Fig.51
► 1. Power button
22 ENGLISH
1
Be sure to lock the brake lever
Be sure to insert the lock key before
Perform the inspection before oper-
1