Makita TW0200 Technical Information page 8

R
epair
< 9 > Mounting handle cover and F/R change lever
1. Push F/R change lever in the direction of the arrow 1. Push the lever in the direction of 2, and then, push in the
direction of 3. So, F/R change lever can be mounted to handle cover. See Fig. 19.
The groove for engaging with switch is carved
another side of this portion
2
1
2. Engaging the tab of switch with the groove
of F/R change lever, mount switch to
handle cover. See Fig. 20.
3. Mount handle cover to motor housing and fasten it with 3 pcs. of tapping screw 4x18. Mount hook.
See Fig. 21.
Handle cover
Tapping screws
4x18
Marking about material
3
< Note >
Face the marking about material
to the mechanical section side
( up side) as per the illustration,
so the groove for engaging with switch
faces automatically to switch, and
possible to mount F/R change lever
to handle cover and engage it with
switch.
Fig. 19
F/R Change lever
F/R Change lever
Fig. 21
Fig. 20
Hook
P 8 /11
Tab of switch