Makita TW0200 Technical Information page 4

R
epair
< 4 > Assembling mechanical section
Before assembling, apply MAKITA grease N. No.1 with referring to "< 1 > Lubrication" at page 2.
1. Mount O ring 58 to internal gear cover. Aligning the tabs of internal gear with the accepting holes of
internal gear cover, mount internal gear 71 to internal gear cover. See Fig. 5.
Internal gear 71
2. Mount hammer section with engaging spur gears 32 with internal gear 71. see Fig. 6.
3. Mount flat washer 19 and anvil to hammer case. And mount hammer section, internal gear 71 and internal
gear cover to hammer case. Mount O ring 12 to internal gear cover. See Fig. 7.
Internal gear cover
Internal gear 71
Hammer section
Hammer case
< 5 > Disassembling hammer section
1. Remove flat washer 18 and 2 pcs. of pin 6 from spindle. Then, 2 pcs. of spur gear 32 can be removed. See Fig. 8.
Align these Tabs with the
accepting holes of internal
gear cover.
O ring 58
Fig. 5
Internal gear 71
Spur gears 32
Hammer section
Anvil
Flat washer 19 : This part can remain
Flat washer 18
Pin 6
Spur gear 32
Internal gear cover
Internal gear cover
Fig. 6
in hammer case, when
disassembling the mechanical
section.
Fig. 7
Pin 6
Spur gear 32
Spindle
Hammer
Fig. 8
P 4 / 11
O ring 12