Makita TW0200 Technical Information page 7

R
epair
< 7 > Removing baffle plate
1. Slide baffle plate to the overhang portion of handle cover. And remove it by pulling in the direction of
black arrow.
Baffle plate
Overhang portion
of handle cover
Handle cover
< 8 > Removing handle cover and F/R change lever
1. After removing hook, unscrew 3 pcs. of tapping screw 4x18, and disengage switch from F/R change lever.
See Fig. 17.
Hook
2. Push F/R change lever in the direction of the arrow 1. Pull the lever in the direction of 2, and then, pull out in the
direction of 3. So, F/R change lever can be removed from handle cover. See Fig. 18.
Handle cover
F/R change lever
Baffle plate
Fig. 16
F/R Change lever
Handle cover
Tapping screws
4x18
Fig. 17
2
Fig. 18
F/R Change lever
1
3
P 7 / 11
Switch