Makita TW0200 Technical Information page 6

R
epair
< 6 > Assembling hammer section
1. Put 31 pcs. of steel ball 3.5 and flat washer 32 into hammer. See Fig. 12
After mounting compression spring 32, cup washer 19 and spindle to hammer, press the hammer toward the spur
gear installing side with "No.1R045 gear extractor" . See Fig. 13.
Flat washer 32
31 pcs. of
steel balls 3.5
Fig. 12
2. Align the top of cam groove of spindle with the opening portion of hammer. And then, mount 2 pcs. of
steel ball 6.4 to spindle. See Fig. 14. Mount spur gears 32, pins 6 and flat washer 18 to spindle. See Fig. 15.
The top of cam groove
and
The opening portion of hammer
3. Mount the assembled hammer section to the machine with referring to "< 4 > Assembling mechanical
section" at page 4.
Spindle
Cup washer 19
Compression
spring 32
Hammer
Steel ball 6.4
Fig. 14
No.1R045
Gear extractor
Fig. 13
Flat washer 18
Pin 6
Spur gear 32
Pin 6
Spindle
Hammer
Fig. 15
P 6 /11
Spur gear 32