Loading A New Driver And Client Utilities - Cisco Aironet 340 Series Installation And Configuration Manual

Chapter 7 Routine Procedures
Step 4 Click OK. The utility informs you that the adapter has been uninstalled. The registry entries (but no files)
are removed.
Step 5 Delete the aironet.dll driver file and the following help files from the \Windows directory of the
Windows CE device: AuthType.htm, CEM.htm, Cisco Setup.htm, ClieName.htm, DataRate.htm,
DHCP.htm, InfrStru.htm, LEAP.htm, LeapLogin.htm, PSMode.htm, SSID.htm, TxPowe.htm,
WEP.htm, and WorldMode.htm.
Delete the following client utility files, which are probably in the \Windows\Programs\Cisco directory
Step 6
on the Windows CE device: Aironet Client Utility.exe, Cisco Aironet Uninstall.exe, Cisco Link
Status.exe, Client Encryption Manager.exe, Client Statistics Utility.exe, Load New Firmware.exe,
and Site Survey Tool.exe.
Step 7 Delete the Cisco directory from \Windows\Programs.
Go to the
Step 8
driver and client utilities.
Uninstalling Driver Version 1.5 or Later for Windows CE 2.11 or 3.0
Step 1 Eject the client adapter and remove it from the Windows CE device.
Step 2 Select Start > Settings > Control Panel > Remove Programs (on an HPC device) or Start > Settings >
System tab > Remove Programs (on a PPC device).
Step 3 Select Cisco Wireless LAN Adapter.
Step 4 Click Remove.
Step 5 When asked to verify your decision to remove the adapter, click Yes.
Step 6 Click OK. The driver, client utilities, registry entries, and Cisco directory are removed.
Go to the
Step 7
driver and client utilities.

Loading a New Driver and Client Utilities

Follow the instructions below to install a new driver and client utilities for your client adapter.
Step 1 Make sure that the client adapter is removed from the Windows CE device.
Step 2 Use a serial or USB cable to connect your Windows CE device to a laptop or PC running ActiveSync. A
message appears on the Windows CE device indicating that it is connecting to the host. After the
Windows CE device is connected, the New Partnership window appears on the laptop or PC. This
window asks if you want to set up a partnership.
Step 3 Perform one of the following:
•
•
OL-1375-02
"Loading a New Driver and Client Utilities"
"Loading a New Driver and Client Utilities"
If you want to establish a partnership that allows you to synchronize files between the laptop or PC
and the Windows CE device, select Yes, click Next, and follow the instructions on the screen to
specify the files to be synchronized and to finish setting up the partnership.
If you do not want to synchronize files and want to connect as a "guest," select No and click Next.
The screen indicates that you are connected as a guest.
Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE
Upgrading the Client Adapter Software
section below for instructions on loading a new
section below for instructions on loading a new
7-7