Installing The Client Adapter Driver And Software - Cisco AIR-CB21AG-W-K9 Installation And Configuration Manual

Installing the Client Adapter Driver and Software

Installing the Client Adapter Driver and Software
Do not eject your client adapter at any time during the installation process, including during the reboot.
Caution
Follow these steps to use to install the client software on a device that is running Windows Vista.
Double-click WinClient-802.11a-b-g-Vista-Ins-Wizard-vxx.exe. A window appears that asks you if
Step 1
you want to run the softward file.
Click Run. The Cisco Aironet Installation Program - InstallShield window appears (see
Step 2
Figure 1-10
Step 3 Allow the preparation sequence to finish . After the preparation sequence finishes, the next Cisco Aironet
Installation Program window appears (see
Cisco Aironet 802.11a/b/g Wireless LAN Client Adapters (CB21AG and PI21AG) Installation and Configuration Guide for Windows Vista
1-18
Cisco Aironet Installation Program—Installation Wizard Preparing Setup Window
Figure
Chapter 1 Product Overview and Installation
1-11).
Figure 1-10).
OL-16534-01