Using Static Wep; Opening Cem - Cisco Aironet 340 Series Installation And Configuration Manual

Using Static WEP

Using Static WEP
This section provides instructions for entering new static WEP keys or overwriting existing static WEP
keys. Follow the procedures in the order listed below:
1.
2.
3.
4.

Opening CEM

Follow the steps below to open CEM.
Double-click the Cisco CEM icon or select Start > Programs > Cisco > Client Encryption Manager.
Step 1
The Enter Password screen appears (see
Windows CE device and is running.
Figure 4-2
Enter the correct password in the Password field and click OK.
Step 2
Passwords are case sensitive and can contain up to 256 alphanumeric characters. The default password
is Cisco (uppercase C followed by lowercase isco). For security reasons, the characters you enter are
displayed as asterisks.
Note
Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE
4-6
Open CEM; see below
View the client adapter's current static WEP key settings; see
Perform one of the following:
Enter a new static WEP key and enable WEP; see
–
Overwrite an existing static WEP key; see
–
Change the CEM password (optional); see
Enter Password Screen
Refer to the "Changing the CEM Password" section on page 4-10
changing the default password.
page 4-7
page 4-7
page 4-9
page 4-10
Figure 4-2), provided a client adapter is installed in the
Chapter 4 Enabling Security Features
for instructions on
OL-1375-02