Disabling Leap - Cisco Aironet 340 Series Installation And Configuration Manual

Using LEAP
Step 6 One of three scenarios occurs:
1.
2.
3.

Disabling LEAP

Follow the steps below if you ever need to disable LEAP.
Step 1 Double-click the Cisco ACU icon or select Start > Programs > Cisco > Aironet Client Utility. The
ACU screen appears (see
Step 2 Select LEAP under Property.
Step 3 Select Disabled in the Value box.
Step 4 Click OK to disable LEAP and to exit the utility.
Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE
4-14
The client adapter authenticates to the RADIUS server using your username and password and receives
a dynamic, session-based WEP key. The bottom of the ACU screen indicates that your client adapter is
authenticated to an access point.
If you enter the username and password incorrectly or enter ones that are not valid for the RADIUS
server on the network, the Wireless Login Module screen reappears with a message indicating that
your login was incorrect. You are able to retry immediately by re-entering the username and
password.
The client adapter times out while trying to authenticate, possibly because it is out of range of an
access point. After 60 seconds, a message appears indicating that the first attempt to authenticate
failed and that the client adapter will continue trying.
During the 60 seconds before the timeout occurs, WLM is running in the background. It
Note
is hidden and does not appear as a running program. If you try to start WLM during this
time, nothing happens because it is already running.
Figure 4-8).
Chapter 4 Enabling Security Features
OL-1375-02