Appendix E
Performing a Site Survey
Using Active Mode
Using Active Mode
Follow the steps below to activate the site survey active mode and obtain current information about your
client adapter's ability to transmit and receive RF packets.
From the Site Survey - Passive screen (see
Figure
E-1), click the Setup button. The Active Mode Setup
Step 1
screen appears (see
Figure
E-2).
Figure E-2
Active Mode Setup Screen
Table E-2
lists and describes the parameters that affect how the site survey is performed. Follow the
instructions in the table to set any parameters.
Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE
E-5
OL-1375-02