Table of Contents
Advertisement
Dual-Mode Internet Telephony Kit
Entering or Deleting Letters, Numbers, and Special Characters
•
To enter a letter or number, press the appropriate key repeatedly until the letter or number appears.
•
To enter a + sign, press and hold down the 0 key for one second while the handset is in standby mode.
•
To enter a pause, press and hold down the # key.
•
For certain entries, such as the handset name or phonebook name, press the 1 key once to enter a space.
Press the 0 or * key repeatedly to enter the special character/symbol you want.
To change the case of a letter, press the # key. The next letter you enter will be in the opposite case (lower-
or uppercase).
•
To erase a character, select Clear; it works as a backspace.
•
To move the cursor, use the navigation pad.
Call Timer
When you are on a call, the call timer shows the duration of your current call.
Paging the Handset
If you have misplaced the handset, press the page button on the USB base station. After you have located the
handset, press the right soft key on your handset to stop the page. You will also use this button if you need to
register additional handsets (described later in this chapter).
22
Figure 4-2: Page the Handset
Chapter 4: Using the Dual-Mode Internet Telephony Kit
Page
Button
Using the Handset
Advertisement
Table of Contents
